MIC2042-2BTS-TR Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the 14-TSSOP (0.173, 4.40mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of 1.6V~5.5V, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Slew Rate Controlled, Status Flag features available on the LED driving board.As you can see, it comes from the MIC2042 family.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 3AV.This LED driver is equipped with a total of 14 pins.It is included in the -- series.The maximum supply voltage for this lighting driver is set to 5.5 V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 0.8 V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.
MIC2042-2BTS-TR Features
1 channels
MIC2042-2BTS-TR Applications
There are a lot of Microchip Technology
MIC2042-2BTS-TR Power Switches ICs applications.
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
- Wireless Modem Data Cards
- PC Cards
- HDD, SSD