MIC2039BYMT-T5 Overview
The package is in the form of a Cut Tape (CT).It is included in the package 6-UDFN Exposed Pad, 6-TMLF®.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.It is part of the MIC2039 family of LED drivers.Currently, there are 1 functions associated with the lighting driver.2.5AV is the maximum output of the LED driver.This results in the maximum output current dropping to 2.5A to meet the operation criteria.Lighting drivers with 177mOhm resistance are used.A component of this type is included in the - series.This LED driver is configured to have a maximum supply voltage of 5.5 V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 2.5 V.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.Stable operation is possible with a maximum operating temperature of 125°C°C.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.It can handle a voltage of 5.5VV as its maximum supply voltage.It is possible to use a voltage as low as 2.5V V as a power supply voltage.
MIC2039BYMT-T5 Features
Resistance of 177mOhm
1 channels
MIC2039BYMT-T5 Applications
There are a lot of Microchip Technology
MIC2039BYMT-T5 Power Switches ICs applications.
- Telecom and Network Systems
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD