P-Channel 0.95 mm PMIC -- Series MIC2033 6 Pin SOT-23-6

A Cut Tape (CT) is used to package it.In the SOT-23-6 package, it is included.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~125°C TJ.As a default, the output is set to 1.A voltage of Not Required is used to power it.There is a maximum output voltage of P-Channel volts on this LED driver.A lighting driver with Slew Rate Controlled, Status Flag features is available.It is a member of the MIC2033 family.The operation is carried out using the 6 pins.As far as the lighting driver is concerned, there are 1 functions.In this case, the LED driving board can produce only 1.2AV as its maximum output.The maximum output current is reduced to 1.2A to meet the operation criteria.It has a resistance of 177mOhm.This electrical component is part of the -- series.This case has the output current set to 350 mA.There is a Switch ICs capacity container for this LED driver that is self-contained.A maximum supply voltage of 5.5 V is set in Vsup.Normal operation requires Vsup above 2.5 V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.A supply voltage of 2.5 V to 5.5 V is recommended for maximum efficiency.For stable operation, the maximum operating temperature is 125°C°C.To ensure reliability, it should operate at -40°C degrees Celsius.This LED driving board can handle voltages up to 5.5VV.Supply voltages as low as 2.5VV are possible.For operation, it has a maximum supply current of 0.3 mA.For this electrical component, High Side is the classification.