MIC2033-10BYM6-TR Overview
Tape & Reel (TR) is how it's packaged.The SOT-23-6 package includes it.This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of P-Channel volts.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.It belongs to the family MIC2033.The 6 pins are used to operate the LED driver.As far as functions are concerned, the lighting driver has 1.This LED driver has a maximum output of 1AV.The maximum output current must drop to 1A to meet the operation criteria.Electrical components such as this are included in the -- series.A self-contained container with a capacity of Switch ICs contains this lighting driver.In this case, Vsup (maximum supply voltage) is set to 5.5 V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.5 V.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, 1 channels are available.A 5 V power supply is used by the part.In order to achieve the best efficiency, the supply voltage should be set to 2.5 V to 5.5 V.In order to ensure stable operation, a maximum operating temperature of 125°C°C should be maintained.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.0.3 mA is the maximum operating current.This electrical component has a classification of High Side Current Limit.
MIC2033-10BYM6-TR Features
1 channels
MIC2033-10BYM6-TR Applications
There are a lot of Microchip Technology
MIC2033-10BYM6-TR Power Switches ICs applications.
- Notebook PC
- Telecom and Network Systems
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
