N-Channel 1.27 mm PMIC -- Series MIC2027 16 Pin 16-SOIC (0.295, 7.50mm Width)

As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 16-SOIC (0.295, 7.50mm Width).This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of USB Switch.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 4 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.I believe it belongs to the MIC2027 family.In order to operate, 16 pins are used.It contains 1 functions.This lighting driver is capable of delivering a maximum output of 500mA volts.It is necessary to reduce the maximum output current to 500mA to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.These electrical components are part of the -- series.Self-contained in an econtainer with a capacity of Switch ICs, this LED driver is self-contained.The maximum supply voltage for this LED driver is 5.5 V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7 V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.We offer 4 channels in total.Optimal efficiency requires a voltage of 2.7 V to 5.5 V.A maximum operating temperature of 85°C°C is required to provide stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.A maximum supply voltage of 5.5VV can be handled by the LED driving board.Electrical components classified as USB High Side Current Limit are included in this category.