N-Channel 1.27 mm PMIC -- Series MIC2026 8 Pin 5V 8-SOIC (0.154, 3.90mm Width)
It is packaged in the form of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 2 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Slew Rate Controlled, Status Flag features available on the LED driving board.As you can see, it comes from the MIC2026 family.A total of 8 terminations can be found in it.During operation, the 8 pins are used.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 500mAV.It is possible to obtain high efficiency with a supply voltage of 5V.This LED driver is equipped with a total of 8 pins.It is included in the -- series.This results in a 500mA output current.The LED driver is packaged in an econtainer with a capacity of Switch ICs.For maximum efficiency, the supply voltage should be set to 2.7 V to 5.5 V.Currently, the interface type of the lighting driver is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.In this case, the electrical component is classified as USB Power Distribution Switch.