N-Channel 1.27 mm PMIC MM8™ Series MIC2025 8 Pin 8-SOIC (0.154, 3.90mm Width)
A Tube is used to package it.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~85°C TA.As a default, the output is set to 1.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Slew Rate Controlled, Status Flag features is available.It is a member of the MIC2025 family.The operation is carried out using the 8 pins.As far as the lighting driver is concerned, there are 1 functions.In this case, the LED driving board can produce only 500mAV as its maximum output.The maximum output current is reduced to 500mA to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.The LED driving board is equipped with a total of 8 pins.It has a resistance of 140mOhm.This electrical component is part of the MM8™ series.This case has the output current set to 500 mA.There is a Switch ICs capacity container for this LED driver that is self-contained.A maximum supply voltage of 5.5 V is set in Vsup.Normal operation requires Vsup above 2.7 V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.A supply voltage of 2.7 V to 5.5 V is recommended for maximum efficiency.A maximum input voltage of 5.5V volts can be applied to it.There is a minimum input voltage of 2.7V volts.For stable operation, the maximum operating temperature is 85°C°C.To ensure reliability, it should operate at -40°C degrees Celsius.This LED driving board can handle voltages up to 5.5VV.Supply voltages as low as 2.7VV are possible.For this electrical component, High Side Switch/USB Power Distribution Switch is the classification.