P-Channel 0.65 mm PMIC -- Series MIC2017 6 Pin 6-VDFN Exposed Pad, 6-MLF®
It is packaged in the manner of a Tape & Reel (TR).There is a 6-VDFN Exposed Pad, 6-MLF® package that includes it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.There are 1 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.It has a total of Load Discharge, Slew Rate Controlled features.The MIC2017 family consists of this type.In order to operate, the 6 pins are used.It consists of 1 functions.In terms of output, the lighting driver can provide a maximum of 2A V.In order to meet the operation criteria, the maximum output current drops to 2A.As a result, it is mounted in the manner of Surface Mount.A total of 6 pins are included in this LED driver.There is an electrical component included in the -- series.It is self-contained in an econtainer with a capacity of Switch ICs.The LED driver is configured with a maximum supply voltage of 5.5 V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.5 V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.In total, there are 1 channels available.It is recommended that the supply voltage be set at 2.5 V to 5.5 V in order to achieve maximum efficiency.For stable operation, the maximum operating temperature should be 85°C°C.The unit is designed to operate at a minimum working temperature of -40°C degrees Celsius to ensure reliability.In terms of supply voltage, it is capable of handling a maximum of 5.5V volts.In the case of this electrical component, it is classified as High Side Switch/USB Power Distribution Switch.