P-Channel 0.65 mm PMIC -- Series MIC2016 6 Pin 6-VDFN Exposed Pad, 6-MLF®

It is packaged in the form of a Tape & Reel (TR).It is included with the 6-VDFN Exposed Pad, 6-MLF® package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.There are Slew Rate Controlled features available on the LED driving board.As you can see, it comes from the MIC2016 family.During operation, the 6 pins are used.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 800mAV.To comply with the operation criteria, the maximum output current is reduced to 800mA.Surface Mount is mounted in the way of this LED driving board.In this case, there is 100MOhm resistance in the LED driving board.It is included in the -- series.The maximum supply voltage for this lighting driver is set to 5.5 V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 2.5 V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.It is designed to be stable at 85°C°C, which is the maximum operating temperature.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.It can handle a maximum voltage of 5.5VV.