P-Channel 0.95 mm PMIC -- Series MIC2016 6 Pin SOT-23-6

It is package in Tape & Reel (TR) case.There is a package for it in the SOT-23-6 package.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates at Not Required volts.It produces a maximum output voltage of P-Channel volts at its maximum output.This LED driving board is equipped with Slew Rate Controlled features in order for it to be useful.There is a MIC2016 family of things that it belongs to.The 6 pins are used for the operation of the system.The LED driving board has a total of 1 functions.The lighting driver's maximum output is 800mAV.As a result, the maximum output current is reduced to 800mA in order to meet the operation requirements.The LED driving board is mounted in the way of Surface Mount.As a result, it has a total of 6 pins.Currently, the LED driving board has a resistance of 100MOhm ohms.It belongs to the -- series.The lighting driver is configured to have a maximum supply voltage of 5.5 V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 2.5 V.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.There are a total of 1 available channels.A maximum operating temperature of 85°C°C is required for stable operation.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.As a result, it is only capable of handling voltages up to 5.5VV.