P-Channel 0.65 mm PMIC -- Series MIC2015 6 Pin 6-VDFN Exposed Pad, 6-MLF®
A Tape & Reel (TR) is used to package it.In the 6-VDFN Exposed Pad, 6-MLF® package, it is included.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~85°C TA.As a default, the output is set to 1.A voltage of Not Required is used to power it.There is a maximum output voltage of P-Channel volts on this LED driver.A lighting driver with Slew Rate Controlled features is available.It is a member of the MIC2015 family.The operation is carried out using the 6 pins.As far as the lighting driver is concerned, there are 1 functions.In this case, the LED driving board can produce only 1.2AV as its maximum output.The maximum output current is reduced to 1.2A to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.It has a resistance of 100MOhm.This electrical component is part of the -- series.There is a Switch ICs capacity container for this LED driver that is self-contained.A maximum supply voltage of 5.5 V is set in Vsup.Normal operation requires Vsup above 2.5 V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.A supply voltage of 2.5 V to 5.5 V is recommended for maximum efficiency.For stable operation, the maximum operating temperature is 85°C°C.To ensure reliability, it should operate at -40°C degrees Celsius.This LED driving board can handle voltages up to 5.5VV.For this electrical component, High Side Current Limit is the classification.