20 Terminals 4V~60V 20-Pin LTC3891 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 105kHz~835kHz 350kHz~535kHz Transistor Driver

As a result of 20-TSSOP (0.173, 4.40mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 4V~60V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 105kHz~835kHz 350kHz~535kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 20. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. A search for "LTC3891" will reveal other relevant dc to dc converter ics. 20 pins are present on switching converter. Input voltage of dc dc voltage regulator must be 4V. Statistically, the DC regulator outputs 24V voltage. Voltages 60V are the maximum that the dc to dc regulator will accept. It's important to remember that the dc dc regulator's normaloutput current is 5A, so you should note it down when starting a new project. DC regulators have a maximum frequency of 835kHz. DC to DC voltage regulator has the value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.80V TO 24V to better satisfy the requirement.