24 Terminals 4.5V~38V 24-Pin LTC3866 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 250kHz~770kHz Transistor Driver

The switching controller fits in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package and is ideal for most applications. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. There are Transistor Driver dc switching's output (s) that it can handle. A 4.5V~38V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 250kHz~770kHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. 24 terminations with various dc switching's functions. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 15V. Other relevant dc to dc converter ics will be returned if you search "LTC3866". Total pins of switching converter are 24. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. A 3.5V voltage of DC regulator was detected in the test statistics. Considering the dc to dc regulator can only accept 38V input voltage, it is important to take note of this. If you start a project, note down the dc dc regulator's usual output current of 30A. There is a maximum frequency of 850kHz for this dc regulators. In order to satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 3.5V.