32 Terminals 3V~5.5V 32-Pin LTC3861 DC to DC converter IC DUAL SWITCHING CONTROLLER 2 Outputs 250kHz~3MHz PWM Signal

Capsuled in the 32-WFQFN Exposed Pad package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 2 outputs. The pmic is packaged in Tube solid enclosure. It is capable of dealing with PWM Signal dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 3V~5.5V. Qualified to work in a -40°C~125°C TJ dc switcher. This switching controller can switch at 250kHz~3MHz. Surface Mount makes it suitable for general dc dc regulator. The dcdc regulator features Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking for efficient switching control. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the QUAD position. 32 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. Other relevant dc to dc converter ics can be found by searching "LTC3861". Switching converter has a total of 32 pins. According to the test statistics, DC regulator outputs 5.5V voltage. The dc dc regulator's usual output current is 60A, which should be noted down when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 91.5 %. The switching controller works at a frequency of 2.25MHz. It belongs to the PolyPhase® series of dc to dc voltage regulator. For nominal working status, the input voltage can be set as 24V.