38 Terminals 4.5V~38V 38-Pin LTC3859 DC to DC converter IC DUAL SWITCHING CONTROLLER 3 Outputs 115kHz~835kHz 350kHz~535kHz Transistor Driver

Capsuled in the 38-TFSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 3 input. PMIC packaging is solid with a Tube enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 4.5V~38V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 115kHz~835kHz 350kHz~535kHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Power Good, Soft Start, Tracking. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 38 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "LTC3859". Pins number 38 of switching converter in total. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 5.4V voltage. In most cases, the dc dc regulator's output current is 25A. This information should be noted when you begin working with the component. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. It is estimated that this dc regulatorhas a maximum frequency of 850kHz.