16 Terminals 4V~38V 16-Pin LTC3851 DC to DC converter IC SWITCHING REGULATOR 1 Outputs 235kHz~750kHz Transistor Driver

It comes in a 16-TFSOP (0.118, 3.00mm Width) Exposed Pad package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4V~38V voltage are supplied and operated. A -40°C~125°C TJ dc switcher is not a problem. A switching controller such as this can switch at a value of 235kHz~750kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Soft Start, Tracking. Switch converters are connected to ICs with SWITCHING REGULATOR analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 16 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. LTC3851 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 16 pins. 4V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 5.5V. The dc to dc regulator is limited to 38V input voltage. You should note down the dc dc regulator's usual output current of 50mA when you start a project. This dc regulatorhas a max frequency of 810kHz. As a result, DC to DC voltage regulator has a value of ALSO OPERATES AS LDO REGULATOR, OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.5V so that the need can be met more directly.