20 Terminals 4V~36V 20-Pin LTC3835 DC to DC converter IC SWITCHING CONTROLLER 250kHz~530kHz Transistor Driver

With its 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller fits the needs of most applications. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 4V~36V and has a 4V~36V supply voltage. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 250kHz~530kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable, Phase Control, Power Good, Soft Start, Tracking. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 20 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. Searching "LTC3835" will return other relevant dc to dc converter ics. 20 pins are on switching converter. Input voltage of dc dc voltage regulator should be 4V. Based on the test statistics, DC regulator outputs voltage 10V. It should be noted that the dc to dc regulator only accepts 36V voltage as input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 20A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 99.4 %. There is a maximum frequency of 580kHz on this dc regulators. Phases of this controller are 1.