8 Terminals 3V~8V 8-Pin LTC3830 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 200kHz Transistor Driver

With its 8-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 3V~8V and has a 3V~8V supply voltage. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 200kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 8 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. Searching "LTC3830" will return other relevant dc to dc converter ics. 8 pins are on switching converter. Input voltage of dc dc voltage regulator should be 3V. Based on the test statistics, DC regulator outputs voltage 7.28V. It should be noted that the dc to dc regulator only accepts 8V voltage as input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 20A. There is a maximum frequency of 250kHz on this dc regulators.