10 Terminals 2.75V~9.8V 10-Pin LTC3809 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 460kHz~635kHz Transistor Driver

With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 2.75V~9.8V and has a 2.75V~9.8V supply voltage. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 460kHz~635kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 10 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 4.2V is input. Searching "LTC3809" will return other relevant dc to dc converter ics. 10 pins are on switching converter. Based on the test statistics, DC regulator outputs voltage 10V. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. Switching controllers work at 250kHz Hz. In order to ensure the dc switcher's functionality, users must limit the voltage to 9.8V due to the dc switcher's maximum input voltage. DC switchers cannot produce output currents greater than 1A. Datasheets state the switching converter can output up to 9.8V volts.