24 Terminals 2.75V~9.8V 24-Pin LTC3736 DC to DC converter IC DUAL SWITCHING CONTROLLER 2 Outputs 300kHz~750kHz Transistor Driver

It comes in a 24-SSOP (0.154, 3.90mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 2 numbers. Tube is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 2.75V~9.8V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 300kHz~750kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Power Good, Soft Start, Tracking. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 24 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 4.2V volts. LTC3736 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 24 pins. As determined by the test statistics, the output voltage of DC regulator is 10V. You should note down the dc dc regulator's usual output current of 1A when you start a project. Switching controller operates at a frequency of 750kHz. The dc switcher's maximum input voltage is 9.8V; users must limit it accordingly. There must be a 2.75V supply voltage. DC switcher will not be able to provide an output current above 1A volts. Its datasheet indicates the switching converter can output a maximum of 10V volts. Communication with high quality requires 1 channels.