4.5V 8-Pin LTC3632 DC DC Voltage Regulator 1 Outputs Tube 20mA 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

It is designed to provide optimal performance by utilizing the Tube package. For space-saving purposes, this voltage regulator is available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package. A total of 1 outputs are configured in this voltage regulator. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. Surface Mount-mount switching regulator. -40°C~125°C TJ should be the operating temperature when voltage regulator is operating. The voltage regulator can be operated with a voltage as low as 4.5V as an input voltage. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.8V. DC DC switching regulator's 20mA output current allows for maximum design flexibility. Voltage regulators' input voltage is limited to 50V. In this case, the DC/DC regulator belongs to the family LTC3632. Voltage can be produced at 50V volts by voltage regulator. The switching regulator operation of the system is controlled by 8 pins. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 800mV. On the basis of 50V's maximal output voltage, DC DC switching regulator can be operated easily. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 50V, which is the highest available. 125°C allows switching regulator's stable operation at a high limit of maximum operating temperature. Reliability is ensured by operating at -40°C, the DC DC switching regulator's minimum operating temperature. A dc to dc voltage regulator's minimum input voltage of 4.5V is supported by the voltage regulator. The DC-DC switching regulator is designed to operate at its maximum input voltage. It is a voltage regulator with 1 channels.