2.7V 8-Pin DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 1MHz Rail/Tube 2A 8-WFDFN Exposed Pad
There is an optimized performance in this voltage regulator because it utilizes the Rail/Tube package. This regulator voltage is equipped with a type of analog integrated circuit that is called a SWITCHING REGULATOR voltage regulator. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 8-WFDFN Exposed Pad package. In this case, DC DC switching regulator has 1 outputs configured to it. DC DC switching regulators like this one generate Fixed outputs on their output pins to handle the power management. This switching regulator is designed to fit the Surface Mount mounting system. Operating at -40°C ~ 125°C (TJ) is the recommended temperature for adjusting voltage regulator's operation. A DC-DC switching regulator of this type operates at a switching frequency of 1MHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. The adjusting voltage regulator's output voltage (Min/Fixed) is 5V. As a result of the 2A output current, voltage regulator offers maximum flexibility in design. 17V volts is DC DC switching regulator's maximum input voltage. Its NOT SPECIFIED peak reflow temperature makes this regulator essentially indestructible. An input voltage of 12 V is required for switching regulator operation. DC DC switching regulator is part of the PMIC - Power Management ICs subcategory and can be found in the PMIC - Power Management ICs category. A voltage of 5(V) volts can be produced by voltage regulator. For switching regulator operation, 8 pins are used. The maximum output voltage of - makes DC DC switching regulator easy to operate. As a result, this regulator operates with the maximum switching frequency of 1000 kHz. This 12 volt voltage regulator is capable of supplying an output current of up to 3.6 A A. This voltage regulator belongs to the - family and is known as a switching DC-DC regulator. An external factor does not affect harley voltage regulator's ability to consume 3.5 uA A of quiescent current. Stable operation of switching regulator is ensured by the high maximum operating temperature 125 °C. With a dc to dc voltage regulator's minimum input voltage of 2.7 V, DC DC switching regulator can support a wide range of applications. Designed to sustain a maximum voltage of 17 V for DC-DC switching regulators. The switching regulator allows an input voltage of 2.7(V) as a minimum. It has a 8-pin voltage regulator dc to dc. The voltage regulator operates with a supply current of 0.0035 mAmps. It is possible to improve reliability by increasing the DC DC switching regulator's switching frequency to 1 MHz. A DC DC switching regulator output current of 2(A) is normal.