2.7V 8-Pin DC DC Voltage Regulator 1 Outputs 1MHz Tube 1A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

A Tube package is used in this voltage regulator to optimize performance. In order to save space, this voltage regulator is packaged in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package. 1 outputs of voltage regulator are configured. Fixed outputs are generated on the output pins of this adjusting voltage regulator. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. Keeping dc to dc voltage regulator's operating temperature at -40°C ~ 125°C (TJ) is essential when operating. A DC-DC switching regulator such as this one switches at 1MHz. Voltage regulators like this one can operate at least with 2.7V as the dc to dc voltage regulator's minimum input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 3.3V. This voltage regulator 12v features maximum design flexibility thanks to its 1A output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 17V. A voltage regulator 12v such as this falls under the PMIC - Power Management ICs category and belongs to this category. The voltage DC DC switching regulator can provide is up to 3.3 V volts. During switching regulator operation, 8 pins are used. Ideally this switch regulator should have an output voltage of about 3.3 V at the very least. The maximal output voltage of - allows adjusting voltage regulator for simple operation. Known as a switching DC-DC regulator, this electronic voltage regulator 12v is part of the - family. There are no external factors that affect DC DC switching regulator's consumption of 3.5 uA A of quiescent current. Operating at the high-limit maximum operating temperature 125 °C makes the voltage regulator stable. To ensure reliability, the voltage regulator 12v operates at a minimum operating temperature of -40 °C. An input voltage of 2.7 V is the minimum voltage that it supports. At its maximum voltage, this DC-DC switching regulator is designed to sustain a 17 V input voltage. Powered by a 0.0035 mA supply current, this DC-DC switching regulator works as a converter between DC and DC. Using 1 MHz as an adjusting voltage regulator's switching frequency could result in improved reliability. 1 A amps is the standard output current of DC DC switching regulator.