24 Terminals 2.25V 24-Pin LTC3615 DC DC Voltage Regulator SWITCHING REGULATOR 2 Outputs 400kHz~4MHz Tube 3A 24-TSSOP (0.173, 4.40mm Width) Exposed Pad

A Tube package is used in this voltage regulator to optimize performance. In this voltage regulator, 24 terminations are present. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. In order to save space, this voltage regulator is packaged in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. 2 outputs of voltage regulator are configured. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. Keeping dc to dc voltage regulator's operating temperature at -55°C~150°C TJ is essential when operating. A DC-DC switching regulator such as this one switches at 400kHz~4MHz. Voltage regulators like this one can operate at least with 2.25V as the dc to dc voltage regulator's minimum input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.6V. This voltage regulator 12v features maximum design flexibility thanks to its 3A output current. Due to its NOT SPECIFIED high peak reflow temperature, this voltage regulator 12v is virtually indestructible. An input voltage of 3.3V is required to meet the requirements of the switching regulator operation. As a member of the LTC3615 family of DC/DC regulators, this is a DC/DC regulator. The voltage DC DC switching regulator can provide is up to 5.5V volts. During switching regulator operation, 24 pins are used. I would like to point out that the voltage regulator 12v has 1 channels.