10 Terminals 2.5V 10-Pin LTC3548 DC DC Voltage Regulator SWITCHING REGULATOR 2 Outputs 2.25MHz Tape & Reel (TR) 400mA 800mA 10-WFDFN Exposed Pad

For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. In this voltage regulator, there are 10 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. Space savings are achieved by placing this voltage regulator in the 10-WFDFN Exposed Pad package. There are 2 outputs on DC DC switching regulator. Adjusting voltage regulator's output pins generate Adjustable output. There is a switching regulator that is compatible with the Surface Mount mounting. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. There is a switching frequency of 2.25MHz for this voltage regulator 12v. Input voltage 2.5V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. The output voltage (Min/Fixed) of this voltage regulator 12v is 0.6V. This voltage regulator 12v offers maximum design flexibility with an output current of 400mA 800mA. The maximum input voltage of this voltage regulator 12v is 5.5V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 3.6V for the purposes of operation. As part of the LTC3548 series of regulators, the voltage regulators can be found. There is a possibility that DC DC switching regulator can give voltage at 5V volts. The switching regulator operation is carried out by 10 pins. There are 1 channels on the regulator voltage.