10 Terminals 2.5V 10-Pin LTC3548 DC DC Voltage Regulator DUAL SWITCHING CONTROLLER 2 Outputs 2.25MHz Tape & Reel (TR) 700mA 1.2A 10-WFDFN Exposed Pad

There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. This harley voltage regulator has 10 terminations. This regulator voltage is equipped with a type of analog integrated circuit that is called a DUAL SWITCHING CONTROLLER voltage regulator. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 10-WFDFN Exposed Pad package. In this case, DC DC switching regulator has 2 outputs configured to it. DC DC switching regulators like this one generate Fixed outputs on their output pins to handle the power management. This switching regulator is designed to fit the Surface Mount mounting system. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. A DC-DC switching regulator of this type operates at a switching frequency of 2.25MHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. The adjusting voltage regulator's output voltage (Min/Fixed) is 1.575V 1.8V. As a result of the 700mA 1.2A output current, voltage regulator offers maximum flexibility in design. Its 260 peak reflow temperature makes this regulator essentially indestructible. An input voltage of 3.6V is required for switching regulator operation. DC/DC regulators of this type are part of the LTC3548 family of voltage regulator 12vs. A voltage of 5.5V volts can be produced by voltage regulator. For switching regulator operation, 10 pins are used. 1 channels are included in the regulator voltage.