10 Terminals 2.5V 10-Pin LTC3548 DC DC Voltage Regulator SWITCHING REGULATOR 2 Outputs 2.25MHz Tape & Reel (TR) 400mA 800mA 10-WFDFN Exposed Pad

It is designed to provide optimal performance by utilizing the Tape & Reel (TR) package. There are 10 terminations in this harley voltage regulator. As this regulator voltage is equipped with an analog IC of the type SWITCHING REGULATOR, it is a SWITCHING REGULATOR-type voltage regulator. For space-saving purposes, this voltage regulator is available in the 10-WFDFN Exposed Pad package. A total of 2 outputs are configured in this voltage regulator. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. Surface Mount-mount switching regulator. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. Voltage regulator's switching frequency reaches 2.25MHz. The voltage regulator can be operated with a voltage as low as 2.5V as an input voltage. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.6V. DC DC switching regulator's 400mA 800mA output current allows for maximum design flexibility. Voltage regulators' input voltage is limited to 5.5V. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. In this case, the DC/DC regulator belongs to the family LTC3548. Voltage can be produced at 5V volts by voltage regulator. The switching regulator operation of the system is controlled by 10 pins. It is a voltage regulator with 1 channels.