28 Terminals 2.3V 28-Pin LTC3546 DC DC Voltage Regulator DUAL SWITCHING CONTROLLER 2 Outputs 2.25MHz 750kHz~4MHz Tube 1A 2A 28-WFQFN Exposed Pad

It is designed to provide optimal performance by utilizing the Tube package. There are 28 terminations in this harley voltage regulator. As this regulator voltage is equipped with an analog IC of the type DUAL SWITCHING CONTROLLER, it is a DUAL SWITCHING CONTROLLER-type voltage regulator. For space-saving purposes, this voltage regulator is available in the 28-WFQFN Exposed Pad package. A total of 2 outputs are configured in this voltage regulator. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. Surface Mount-mount switching regulator. -40°C~125°C TJ should be the operating temperature when voltage regulator is operating. Voltage regulator's switching frequency reaches 2.25MHz 750kHz~4MHz. The voltage regulator can be operated with a voltage as low as 2.3V as an input voltage. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.6V. DC DC switching regulator's 1A 2A output current allows for maximum design flexibility. Voltage regulators' input voltage is limited to 5.5V. With its peak reflow temperature of 250, this voltage regulator is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. In this case, the DC/DC regulator belongs to the family LTC3546. Voltage can be produced at 5V volts by voltage regulator. The switching regulator operation of the system is controlled by 28 pins. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 600mV. A maximum output current of 2A A is available to meet the switching regulator operation requirements. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 5V, which is the highest available. It is a voltage regulator with 1 channels.