16 Terminals 2.4V 16-Pin LTC3534 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 1MHz Tape & Reel (TR) 500mA 16-SSOP (0.154, 3.90mm Width)
It is designed to provide optimal performance by utilizing the Tape & Reel (TR) package. There are 16 terminations in this harley voltage regulator. As this regulator voltage is equipped with an analog IC of the type SWITCHING REGULATOR, it is a SWITCHING REGULATOR-type voltage regulator. For space-saving purposes, this voltage regulator is available in the 16-SSOP (0.154, 3.90mm Width) package. A total of 1 outputs are configured in this voltage regulator. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. Surface Mount-mount switching regulator. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. Voltage regulator's switching frequency reaches 1MHz. The voltage regulator can be operated with a voltage as low as 2.4V as an input voltage. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 1.8V. DC DC switching regulator's 500mA output current allows for maximum design flexibility. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 5V as the nominal input voltage. In this case, the DC/DC regulator belongs to the family LTC3534. Voltage can be produced at 7V volts by voltage regulator. The switching regulator operation of the system is controlled by 16 pins. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 7V, which is the highest available.