2.5V 10-Pin DC DC Voltage Regulator DUAL SWITCHING CONTROLLER 2 Outputs 2.25MHz Tube 800mA 10-WFDFN Exposed Pad

Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. There is a DUAL SWITCHING CONTROLLER type analog IC in this voltage regulator 12v that is used to convey analog signals. There is a 10-WFDFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. 2 outputs have been configured in the voltage regulator 12v. On its output pins, this adjusting voltage regulator generates Adjustable output. Switching regulators like this one can be mounted on the Surface Mount mounting system. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C ~ 85°C (TA). In this voltage regulator 12v, the switching frequency is 2.25MHz. Regulator 2.5V can operate with dc to dc voltage regulator's minimum input voltage 2.5V. There is a adjusting voltage regulator's voltage output (Min/Fixed) of 0.6V. DC DC switching regulator's maximum design flexibility comes from its output current of 800mA. Voltage regulator's input voltage can reach 5.5V. A regulator with this 260 peak reflow temperature is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 3.6 V. Voltage regulator is capable of giving voltage at 0.6 to 5(V) volts. In order to operate voltage regulator, 10 pins are required. The maximal output voltage of 5V allows DC DC switching regulator to be operated easily. The maximum switching frequency of the regulator is 2700 kHz, which is used to operate it. This 12 volt voltage regulator has an output current of 1.6 A A at the top of the range. A switching DC-DC regulator, it is a member of the - family of electronic voltage regulator 12vs. Without external influences, harley voltage regulator consumes 40 uAA of quiescent current. Stable operation of switching regulator is possible because of the high operating temperature 85 °C limit. The voltage regulator 12v must operate at a minimum operating temperature of -40 °C in order to remain reliable. The voltage regulator 12v supports a dc to dc voltage regulator's minimum input voltage of 2.5 V for its input. It is possible to set the dc to dc voltage regulator's minimum input voltage to 2.5(V) with this voltage regulator dc to dc. A total of 10 pins are present on this voltage regulator dc to dc. An increase in reliability can be achieved by using a DC DC switching regulator's switching frequency of 2.25 MHz. In normal circumstances, 0.8/0.8(A) are the output current of DC DC switching regulator. A 1 channel is present on the regulator voltage.