5 Terminals 2.5V 5-Pin LTC3406 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 1.5MHz Cut Tape (CT) 600mA SOT-23-5 Thin, TSOT-23-5

Using the Cut Tape (CT) package, this voltage regulator optimizes the performance of the voltage regulator 12v. A voltage regulator consists of 5 terminations. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. There is a SOT-23-5 Thin, TSOT-23-5 package available for this voltage regulator, as DC DC switching regulator is space-saving. 1 outputs have been configured in the voltage regulator 12v. On its output pins, this adjusting voltage regulator generates Fixed output. Switching regulators like this one can be mounted on the Surface Mount mounting system. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. In this voltage regulator 12v, the switching frequency is 1.5MHz. Regulator 2.5V can operate with dc to dc voltage regulator's minimum input voltage 2.5V. DC DC switching regulator's maximum design flexibility comes from its output current of 600mA. Voltage regulator's input voltage can reach 5.5V. A regulator with this 250 peak reflow temperature is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 3.6V. LTC3406 is a family of voltage regulators that belong to the DC/DC industry. Voltage regulator is capable of giving voltage at 1.5V volts. In order to operate voltage regulator, 5 pins are required. This voltage regulator 12v should be configured with an output voltage that is at least 1.5V.