2.7V DC DC Voltage Regulator SWITCHING REGULATOR 8 Outputs 2MHz Reel 1A 38-TFSOP (0.173, 4.40mm Width) Exposed Pad

For optimal performance, this voltage regulator uses the Reel package. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. Space savings are achieved by placing this voltage regulator in the 38-TFSOP (0.173, 4.40mm Width) Exposed Pad package. There are 8 outputs on DC DC switching regulator. Adjusting voltage regulator's output pins generate Adjustable output. There is a switching regulator that is compatible with the Surface Mount mounting. As long as its operating temperature is -40°C ~ 150°C (TJ), dc to dc voltage regulator should perform well. There is a switching frequency of 2MHz for this voltage regulator 12v. Input voltage 2.7V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. The output voltage (Min/Fixed) of this voltage regulator 12v is 0.8V. This voltage regulator 12v offers maximum design flexibility with an output current of 1A. The maximum input voltage of this voltage regulator 12v is 5.5V. As a result of the NOT SPECIFIED peak reflow temperature, this regulator is essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 3.3 V for the purposes of operation. Listed under the subcategory of PMIC - Power Management ICs is this voltage regulator 12v. There is a possibility that DC DC switching regulator can give voltage at 800 mV to 5.5 V volts. On the basis of the maximum output voltage of 5.5V, adjusting voltage regulator can be operated easily. This 12 volt voltage regulator can output 2.7 A A at its top. The switching DC-DC regulator belongs to the - family of electronic voltage regulator 12vs. In addition to adding efficiency and stability to the harley voltage regulator, the OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V feature brings even greater benefits. Switching regulator with 38 pins for DC-DC power. The DC-DC switching regulator runs on a 0.2 mA supply current. Using 2 MHz as the adjusting voltage regulator's switching frequency can improve reliability. 1 A is normally the output current ofDC DC switching regulator.