12 Terminals 12-Pin LTC3261 DC DC Voltage Regulator SWITCHED CAPACITOR REGULATOR 1 Outputs 500kHz Tape & Reel (TR) 12-TSSOP (0.118, 3.00mm Width) Exposed Pad

A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. In this voltage regulator, 12 terminations are present. A SWITCHED CAPACITOR REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. In order to save space, this voltage regulator is packaged in the 12-TSSOP (0.118, 3.00mm Width) Exposed Pad package. 1 outputs of voltage regulator are configured. Fixed outputs are generated on the output pins of this adjusting voltage regulator. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. Keeping dc to dc voltage regulator's operating temperature at -55°C~150°C TJ is essential when operating. A DC-DC switching regulator such as this one switches at 500kHz. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to -Vin Vin/2. As far as the voltage input is concerned, DC DC switching regulator can accept up to 32V. An input voltage of 12V is required to meet the requirements of the switching regulator operation. As a member of the LTC3261 family of DC/DC regulators, this is a DC/DC regulator. The voltage DC DC switching regulator can provide is up to -32V volts. During switching regulator operation, 12 pins are used. A maximum output current of 100mA A is provided to meet the switching regulator operation requirements. In order to ensure reliable performance, a dc to dc voltage regulator's minimum supply voltage of 4.5V V is required. There is a maximum input voltage of 32V that DC DC switching regulator can operate from. Powered by a 60μA supply current, this DC-DC switching regulator works as a converter between DC and DC.