6 Terminals 1.8V 6-Pin LTC3204 DC DC Voltage Regulator SWITCHED CAPACITOR REGULATOR 1 Outputs 1.2MHz Cut Tape (CT) 6-WFDFN Exposed Pad

For optimal performance, this voltage regulator uses the Cut Tape (CT) package. In this voltage regulator, there are 6 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHED CAPACITOR REGULATOR. Space savings are achieved by placing this voltage regulator in the 6-WFDFN Exposed Pad package. There are 1 outputs on DC DC switching regulator. Adjusting voltage regulator's output pins generate Fixed output. There is a switching regulator that is compatible with the Surface Mount mounting. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. There is a switching frequency of 1.2MHz for this voltage regulator 12v. Input voltage 1.8V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. The maximum input voltage of this voltage regulator 12v is 4.5V. As a result of the 250 peak reflow temperature, this regulator is essentially indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 3.6V for the purposes of operation. As part of the LTC3204 series of regulators, the voltage regulators can be found. There is a possibility that DC DC switching regulator can give voltage at 3.3V volts. The switching regulator operation is carried out by 6 pins. In order for this switching regulator to work properly, the output voltage should be at least 3.3VV. Switching regulator has a maximum output current of 50mA A, which is sufficient to meet the requirements of operation. The 1.8V V dc to dc voltage regulator's minimum supply voltage ensures reliable performance. A maximum supply voltage of 4.5V is required for adjusting voltage regulator to operate. The DC-DC switching regulator runs on a 48μA supply current.