Enable, Error Flag Adjustable (Fixed) 2.54mm LP2951-03 PMIC -- Series 8-DIP (0.300, 7.62mm)
Tube cases are used for delivery. The Liner regulator IC is packaged in 8-DIP (0.300, 7.62mm) case. On the Linear IC itself, there are 8 terminations. Adjustable (Fixed) is the output type of the Voltage Regulator IC. As part of this electrical component, 1 regulators are implemented. Variations are made to the Through Hole operating temperature range by the Voltage Regulator IC. Default settings are set to -40°C~125°C degrees. There is a Positive configured as the output function for this IC regulator. There is a current output of 100mA from this regulator IC. There are 1 Output outputs total on this voltage regulator IC in order to ensure that prompt and sufficient performance is achieved. There is a dropout voltage of 10 volts on this IC regulator. For your information, the basic part number for this regulator IC is LP2951-03. In this case, we have a typical PMIC - Power Management ICs component. There is one type of regulator for this device, which is FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR. It operates in the 75 uA Quiescent Current state. This IC regulator is a part of the -- Series of devices.