24KB 8K x 24 FLASH dsPIC 16-Bit Microcontroller dsPIC™ 30F Series DSPIC30F3014 40 Pin 30MHz 5V 40-DIP (0.600, 15.24mm)

Packaged in a 40-DIP (0.600, 15.24mm) format. A total of 30 I/Os are on the Microcontroller. Through Hole is the mounting type of the Microcontroller that is attached to the panel. This Microcontroller is based on a core called 16-Bit. The type of its program memory is FLASH. In this Microcontroller, temperature is controlled within the range -40°C~85°C TA. A dsPIC™ 30F series electrical component is used in this application. This program has a program memory of 24KB 8K x 24 bytes, which is the size of the program. With a dsPIC Core Processor, Microcontroller is fast and efficient. ICs for MICROCONTROLLER, RISC uPs/uCs/peripheral parts. There are 40 terminations on the IC chip, which means there are 40 terminations on the integrated circuit chip. In addition, MCU chip comes with a 16-bit size. Microcontroller chip has outputs of 5V volts. The system has NO channels for DMA communication. There is 24kB memory size assigned to the part. Alternatives can be found by searching through the base part number DSPIC30F3014 to find them. At a frequency of 30MHz, Microcontroller can operate efficiently. Chips have 40 pins. There are 3 timers/counters in this device. In total, it has 40 pins. The equipment has a FLASH memory that is built in. It is equipped with a dsPIC core architecture which is integrated into it. In the 30 Programmable I/O section, it can be programmed in many different ways. This device comes with a set of 1 A/D converters that have been built into it. An integrated circuit with 16 bits has a total of 16 bits. This device uses 2 PWM channels to generate the voltage.