DCP010505DBP-UE4 Overview
SOP packaging is voltage regulators' for voltage regulators' transportation.There are total of 2 outputs that are supported by voltage regulator.A 7 pattern is used for this voltage regulator's pin arrangement.It can be used in many different applications due to its output voltage of 5.75 V.A voltage of 4.5 V is required for this regulator.It is possible to use 5.5 V voltage with this voltage regulator.An output type Fixed is used for this regulator controller.The DC DC Switching Regulator should output 100 mA at the moment.Regulator controller displays a quiescent current of 22 mA.Maximum current 100 mA will be produced by it.There is a voltage limit of 4.25 V on the output of this controller.The temperature must be higher than -40 °C for the voltage regulator to function.Using higher temperatures than 100 °C is not recommended.The maximum voltage that can be output by this voltage regulator is 5.75 V voltage.
DCP010505DBP-UE4 Features
2 outputs
Quiescent Current: 22 mA
DCP010505DBP-UE4 Applications
There are a lot of Texas Instruments
DCP010505DBP-UE4 Linear Regulator Controllers applications.
- Low-dropout SMPS post regulator
- High-current, current-limited switch
- Dual/Triple Power Supplies
- Desknotes and Notebooks
- Graphic Cards
- Ultra-Low-Dropout
- Voltage Regulators
- Low-Voltage DSP Power Supplies
- Microcontroller Power Supplies
- Motherboards