PMIC BTS5562 36 Pin 36-BSSOP (0.295, 7.50mm Width) Exposed Pad
Using its 36-BSSOP (0.295, 7.50mm Width) Exposed Pad package, it is possible to save board space. LED drivers design with 5 outputs.This mounting method is Surface Mount.The system emerges as a DC DC Regulator with high efficiency.It is capable of working normally at -40°C~150°C TJ.Automotive has considerable advantages.This configuration is built upon 36 pins.It is possible that failures will occur if the voltage supply is below 5.5V.The mount is in the way of Surface Mount.The LED driver is available under the part number BTS5562.There is no maximum value acceptable for the supply voltage, so 28V is acceptable.The voltage range of this device is optimized for a maximum supply voltage of 28V.The operating temperature should not exceed 150°C to ensure stable operation.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.