Features
• Industry Standard Size
• Industry Standard Pinout
7.62 mm (0.300 inch) DIP
Leads on 2.54 mm
(0.100 inch) Centers
• Choice of Colors
Red, AlGaAs Red, High
Efficiency Red, Yellow, Green
• Excellent Appearance
Evenly Lighted Segments
Gray Package Gives Optimum
Contrast
± 50° Viewing Angle
• Design Flexibility
Common Anode or
Common Cathode
Single Digits
Left or Right Hand Decimal
Point
± 1. Overflow Character
• Categorized for Luminous
Intensity
Yellow and Green Categorized
for Color
Use of Like Categories Yields a
Uniform Display
• High Light Output
• High Peak Current
• Excellent for Long Digit
String Multiplexing
• Intensity and Color
Selection Available
See Intensity and Color
Selected Displays Data Sheet
• Sunlight Viewable AlGaAs
Description
The 7.6 mm (0.3 inch) and 10.9
mm (0.43 inch) LED seven
Red AlGaAs
[1]
HER
[1]
Yellow Green Package
5082- Red HDSP- 5082- 5082- HDSP- Description Drawing
7730 7610 7620 3600 7.6 mm Common Anode Left Hand Decimal A
7731 7611 7621 3601 7.6 mm Common Anode Right Hand Decimal B
7740 7613 7623 3603 7.6 mm Common Cathode Right Hand Decimal C
7736 7616 7626 3606 7.6 mm Universal ± 1. Overflow Right Hand Decimal
[2]
D
7750 E150 7650 7660 4600 10.9 mm Common Anode Left Hand Decimal E
7751 E151 7651 7661 4601 10.9 mm Common Anode Right Hand Decimal F
7760 E153 7653 7663 4603 10.9 mm Common Cathode Right Hand Decimal G
7756 E156 7656 7666 4606 10.9 mm Universal ± 1. Overflow Right Hand Decimal
[2]
H
Notes:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-E10X AlGaAs and HDSP-335X HER data
sheet for low current operation.
2. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram D.
3. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram H.
Devices
5082-761X Series
5082-762X Series
5082-765X Series
5082-766X Series
5082-773X Series
5082-7740
5082-775X Series
5082-7760
HDSP-360X Series
HDSP-460X Series
HDSP-E15X Series
7.6 mm (0.3 inch)/10.9 mm
(0.43 inch) Seven Segment
Displays
Technical Data
segment displays are designed for
viewing distances up to 3 metres
(10 feet) and 5 metres (16 feet).
These devices use an industry
standard size package and
pinouts. All devices are available
as either common anode or
common cathode.
2
ambient design. The low current
displays are ideal for portable
applications. The high light
ambient displays are ideal for
high light ambients or long string
lengths. For additional informa-
tion see the Low Current Seven
Segment Displays, or High Light
Ambient Seven Segment Displays
data sheets.
NOTES;
1. DIMENSIONS IN
MILLIMETRES AND
(INCHES).
2. ALL UNTOLERANCED
DIMENSIONS ARE
FOR REFERENCE
ONLY.
3. REDUNDANT
ANODES.
4. UNUSED DP
POSITION.
5. SEE INTERNAL
CIRCUIT DIAGRAM.
6. REDUNDANT
CATHODE.
7. SEE PART NUMBER
TABLE FOR L.H.D.P.
AND R.H.D.P.
DESIGNATION.
8. FOR YELLOW AND
GREEN DEVICES
ONLY.
Package Dimensions
These displays are ideal for most
applications. Pin for pin equiva-
lent displays are also available in
a low current or high light
3
Internal Circuit Diagram
Absolute Maximum Ratings
Red AlGaAs Red HER Yellow Green
5082-7700 HDSP-E150 5082-7610/ 5082-7620/ HDSP-3600/
Description Series Series 7650 Series 7660 Series 4600 Series Units
Average Power per Segment or DP 82 96 105 80 105 mW
Peak Forward Current per 150
[1]
160
[3]
90
[5]
60
[7]
90
[9]
mA
Segment or DP
DC Forward Current per 25
[2]
40
[4]
30
[6]
20
[8]
30
10]
mA
Segment or DP
Operating Temperature Range -40 to +100 -20 to +100
[11]
-40 to +100 °C
Storage Temperature Range -55 to +100 °C
Reverse Voltage per 3.0 V
Segment or DP
Lead Solder Temperature for 3
Seconds (1.59 mm [0.063 in.] 260 °C
below seating plane
Notes:
1. See Figure 1 to establish pulsed conditions.
2. Derate above 80°C at 0.63 mA/°C.
3. See Figure 2 to establish pulsed conditions.
4. Derate above 46°C at 0.54 mA/°C.
5. See Figure 7 to establish pulsed conditions.
6. Derate above 53°C at 0.45 mA/°C.
7. See Figure 8 to establish pulsed conditions.
8. Derate above 81°C at 0.52 mA/°C.
9. See Figure 9 to establish pulsed conditions.
10. Derate above 39°C at 0.37 mA/°C.
11. For operation below -20°C, contact your local Agilent components sales office or an authorized distributor.
